Antlered corrosion

Anything and everything related to firearm maintenance, modification, safety and troubleshooting can be posted here.

Copper BB
Posts: 1
Joined: Fri Apr 19, 2013 4:29 pm
PostPosted: Fri Apr 19, 2013 4:41 pm
The gold receiver on my Antlered has corrosion where it meets the wood. How to remove? Thanks
User avatar
.22LR
Posts: 14
Joined: Sat Feb 22, 2014 8:38 pm
PostPosted: Sat Feb 22, 2014 9:14 pm
Hi,

I use M-Pro-7 gun cleaner with a medium nylon brush.
If it is really bad, I use a brass brush, very lightly though.
Afterwards, I completely clean off the M-Pro-7 and put on a light coat of Ballistol for lubrication and protection.

You do need to watch with a magnifying glass, if possible, as you do this, to see if the corrosion has gone through the finish. If so, you'll need to take it to a professional, rather than risk damaging your gun's finish permanently.

Good luck!

Return to Firearm Maintenance, Modification, Safety And Troubleshooting

Who is online

Users browsing this forum: No registered users and 9 guests

cron
Winchester Owners Forum is privately owned and operated. It is not affiliated or operated by Winchester company. Views and opinions expressed here are not necessarily that of Winchester.