Hello folks, thought I would try get an answer from this forum about my new SXP Extreme Defender. I just got this a couple days ago and was reading the manual today. It recommends disassembling, cleaning and oiling prior to use. The problem is I can't get the trigger group to pull out after I remove that pin. I removed the barrel, cocked the gun and put the safety on just like the manual said. Then removed the pin but the trigger group only lifts up about 1/8" I tried wiggling but no go.
I did clean and oil the mechanism the best I could, cleaned and oiled the barrel and fired a couple shots off without any problems.
Any ideas?
New SXP owner, need help
4 posts
• Page 1 of 1
Welcome to the Winchester Owners Forum Paul !!
Not familiar with that problem...but I sure someone here will be along to help...stand by !! |
|
Thanks for the welcome.
I actually figured this out. Shame on Winchester for not even having a manual for this specific model. The extreme defender has a pistol grip. This MUST be removed so that you can pull the trigger group out. So after much cussing and frustration the gun is now cleaned, oiled and back together. |
|
Welcome Paul. Perseverance worked for you.
GOA Life Member
NRA Sustaining Member USMC Korea vet Retired CWO3 USCGR |
|
4 posts
• Page 1 of 1
Return to Firearm Maintenance, Modification, Safety And Troubleshooting
Who is online
Users browsing this forum: No registered users and 13 guests
Winchester Owners Forum is privately owned and operated. It is not affiliated or operated by Winchester company.
Views and opinions expressed here are not necessarily that of Winchester.