Page 1 of 1

Stock Care Question

PostPosted: Tue Dec 27, 2016 3:45 am
by Hhenry
What is the best way to care for the wood on a new 92? Thanks!

Re: Stock Care Question

PostPosted: Tue Dec 27, 2016 10:04 am
by XLIV
Renaissance Wax

44

Re: Stock Care Question

PostPosted: Tue Dec 27, 2016 10:15 am
by Hhenry
XLIV wrote:Renaissance Wax

44


Much thanks! Will get some.

Re: Stock Care Question

PostPosted: Tue Dec 27, 2016 10:37 am
by redryder
That stuff works for me.

Re: Stock Care Question

PostPosted: Tue Dec 27, 2016 8:59 pm
by ColdWarGrunt
Good ol Simoniz paste wax works great as well and not to spendy either!

Re: Stock Care Question

PostPosted: Wed Dec 28, 2016 9:01 am
by Hhenry
The owner of the LGS where I work (a serious Marlin & Winchester lever rifle collector) tells me NOT to put any wax or oil on the stock in order to preserve its worth and natural look. I'm a tad torn here! Is this the conventional route to take? FWIW, it's doubtful I'll ever part with this treasure.

Thanks to all who replied to my initial question! I continue to welcome your advice!!

Re: Stock Care Question

PostPosted: Wed Dec 28, 2016 10:14 am
by redryder
I still go with the quality wax. Most every option toward collecting firearms is subjective. I don't consider myself a collector. I have mostly early BB guns that could be considered collected and admire the glossy furniture on all my holdings.

Your gun, your call.

Re: Stock Care Question

PostPosted: Thu Dec 29, 2016 1:46 pm
by Hhenry
redryder wrote:I still go with the quality wax. Most every option toward collecting firearms is subjective. I don't consider myself a collector. I have mostly early BB guns that could be considered collected and admire the glossy furniture on all my holdings.

Your gun, your call.


Makes sense to me. Will definitely choose to wax. Thanks again!

Re: Stock Care Question

PostPosted: Thu Dec 29, 2016 10:17 pm
by ColdWarGrunt
If you go to WinchesterCollector.org and go to the forum, search about wax, you will find many high end collectors use wax. Many do use renaissance wax, and some as I use Simoniz (The Yellow Can), not spray can waxes. One thing to note about Simoniz, it is the purest wax you can buy with No chemical additives.

If you do use wax, take the butt plate off, forearm if possible, and hit areas normally left unfinished. Also, heat the wood with a heat lamp so as to make the wood absorb the wax into the pores. Use it on metal as well. Apply light coats, notice I said coats, and allow to soak into the wood. Wax will protect metal from possibly rusting. After it has dried, buff off. Remember two light coats are better than one heavy coat of wax.

Gives a nice finish to the wood and after time will wear off with absolutely no ill effects. Do some research don't take folks word as gospel, and make a decision for yourself. Lots of good ideas, opinions and such on this forum as well. Good luck!

Re: Stock Care Question

PostPosted: Sat Dec 31, 2016 10:17 am
by Hhenry
ColdWarGrunt wrote:If you go to WinchesterCollector.org and go to the forum, search about wax, you will find many high end collectors use wax. Many do use renaissance wax, and some as I use Simoniz (The Yellow Can), not spray can waxes. One thing to note about Simoniz, it is the purest wax you can buy with No chemical additives.

If you do use wax, take the butt plate off, forearm if possible, and hit areas normally left unfinished. Also, heat the wood with a heat lamp so as to make the wood absorb the wax into the pores. Use it on metal as well. Apply light coats, notice I said coats, and allow to soak into the wood. Wax will protect metal from possibly rusting. After it has dried, buff off. Remember two light coats are better than one heavy coat of wax.

Gives a nice finish to the wood and after time will wear off with absolutely no ill effects. Do some research don't take folks word as gospel, and make a decision for yourself. Lots of good ideas, opinions and such on this forum as well. Good luck!


Thank you very much for the insightful and thus helpful reply! Much appreciated!!

Re: Stock Care Question

PostPosted: Mon Jan 02, 2017 8:40 pm
by ColdWarGrunt
Don't know about insightful or helpful, just another's opinion is all. That's what makes this forum a great place. What ever you decide to do make sure to make an update on what you decided to do and how ya did it.

Re: Stock Care Question

PostPosted: Sat Jan 07, 2017 2:24 pm
by Hhenry
ColdWarGrunt wrote:Don't know about insightful or helpful, just another's opinion is all. That's what makes this forum a great place. What ever you decide to do make sure to make an update on what you decided to do and how ya did it.


A good friend and custom gun shop owner here in Princeton, West Virginia, kindly applied one coat of a quality wax he uses to my 92. I was pleased with the outcome as there was no apparent change in the finish of the wood, but now it bears the benefit of some added protection!