Cutaway drawing of a pre-64 Model 70

Anything and everything related to firearm maintenance, modification, safety and troubleshooting can be posted here.
User avatar
.410
Posts: 59
Joined: Mon Dec 12, 2011 12:54 am
PostPosted: Mon Dec 12, 2011 8:27 pm
I don't remember where I found this, but I thought it might be helpful to somebody. I found it while reading up on the coned breech...wanted to know if it was as much of a weakness as it is sometimes made out to be.

In my opinion its not weak at all...the Rem 700 is stronger around the case head, without question...but the Model 70 isn't weak there. Some folks talk about it like its a Glock chamber or something. The case is fully supported, its just not wrapped in steel like it is in the Rem 700...

My conclusion...its plenty strong enough.

Image
Last edited by Ridgerunner665 on Mon Dec 12, 2011 9:31 pm, edited 2 times in total.
PostPosted: Mon Dec 12, 2011 9:30 pm
Thanks for posting...I love the cutaway schematics !!
User avatar
.410
Posts: 59
Joined: Mon Dec 12, 2011 12:54 am
PostPosted: Mon Dec 12, 2011 9:33 pm
Glad to share what little I know :)

.270 WIN
Posts: 449
Joined: Sun Sep 11, 2011 1:09 pm
PostPosted: Tue Dec 13, 2011 9:01 am
Thank You Ridge!!!!!!
"Im just a Peckerwood who lives in the hills with too many guns"

.270 WIN
Posts: 449
Joined: Sun Sep 11, 2011 1:09 pm
PostPosted: Tue Dec 13, 2011 9:03 am
Ridgerunner665 wrote:Glad to share what little I know :)

Dont let him fool you RR is very knowlegable, well with Marlins :D
"Im just a Peckerwood who lives in the hills with too many guns"

.22LR
Posts: 12
Joined: Mon Dec 12, 2011 10:03 pm
Location: Michigan
PostPosted: Tue Dec 13, 2011 11:46 am
That is handy. Thanks for sharing.


M
"Inconceivable."

Copper BB
Posts: 8
Joined: Tue Dec 13, 2011 7:37 am
PostPosted: Tue Dec 13, 2011 1:53 pm
For comparative purposes, a similar diagram for the Mauser 98:

Image

Copper BB
Posts: 8
Joined: Tue Dec 13, 2011 7:37 am
PostPosted: Tue Dec 13, 2011 2:03 pm
The main differences that stick out to me are the cone breeching, the resulting angle that the bolt head has to make (resulting in a little less metal around the case head), and the recoil lug location and size. From a reliability standpoint it seems like the cone breech is a good tradeoff, from just looking at the thing, to me.

I think the old Springfield 1903 was supposed to have a coned breech, too, I've never really inspected one with an eye for that.

Return to Firearm Maintenance, Modification, Safety And Troubleshooting

Who is online

Users browsing this forum: No registered users and 8 guests

Winchester Owners Forum is privately owned and operated. It is not affiliated or operated by Winchester company. Views and opinions expressed here are not necessarily that of Winchester.