WinchesterOwners.com

Ultimate Target & Sniper Stock

http://www.deltaforce.com/catalog/ultimatetargetandsniperstock.html



-TWO CHEEK PIECES FURNISHED, STANDARD HEIGHT & 5/16" TALLER FOR HIGH RINGS
-FREE FLOATING BARREL
-ANSCHUTZ TYPE "T" RAIL FOR ACCESSORIES
-FLUSH MOUNTED SLING SWIVEL STUDS ON BOTH SIDES & BOTH ENDS OF STOCK
-2" FLAT, PARALLEL TO BARREL W/ 1/8" SERRATIONS
-ANGLED FOR ELEVATION ADJUSTMENT & BIPOD FOLD UP TO BARREL • 2 1/2" WIDE FLAT ON BOTTOM OF FOREARM
-HEAVY STIPPLING AROUND GRIPS
-ALUMINUM BEDDING BLOCK MOLDED INSIDE STOCK
-FINE ADJUSTING KNOB FOR ELEVATION
-FIVE HEIGHT ADJUSTMENTS, CENTER, UP & DOWN 1/4" & 1/2" (SHOWN UP 1/2")
-ADJUSTABLE L.O.P. FROM 13 3/4" OUT, IN 1/4" INCREMENTS

We predict that this stock will be a benchmark for sniper rifles in the future. We have features that the hand laid fiberglass/kevlar stock makers cannot incorporate into their stocks. What we have done is eliminate most of the expensive hand labor and passed the savings on to you. We are keeping the price down so that most rifle owners can afford a top notch sniper stock. Most shooters know what free floating the barrel and a bedding block does for a rifle, we have made this difficult job easy. The stock is molded in dark olive drab green color. The polymer stock can be painted with almost any automotive spray color. The rubber recoil pad is a little on the stiff side because it is much more durable at this durometer than a cushy pad, with a 3/4" compression that can allow a shooter to get a scope eye piece hit in the eyebrow. Comes with mounting plate for Harris Bipod, (bipod not included). The stock comes in short or long action, the short action caliber rifles are: .223, .243, .308. Long action Caliber rifles are: 30.06, .270, .300, .375 , etc. Trigger Guard/Reciever Screw Spacing, Center to Center
Remington: Short Action - 6.500" Long Action - 7.350"
Savage: Short Action - 4.275" Long Action - 5.062"
Winchester: Short Action - 7.031" Long Action - 7.570"

Choate Ultimate Sniper Stock for Winchester 70 Long Action

http://www.combatstocks.com/Choate_Ultimate_Sniper_Stock_for_Winchester_70_Long_Action.cfm



Diagram and Installation Instructions for the Choate Ultimate Varmint Stock



A) This is the elevation adjusting knob. If you are on a hard surface you can use it without the block. If you are in the field we suggest you can carry a 2" x 4" x 6" wood block. You can make your course adjustment with your bipod and one of the block heights will put you in your adjusting range of the screw. The screw removes completely one degree rotation for seventeen millionths of an inch. You can get really fine on your elevation adjustment.

B) This is a 1 inch thick rubber recoil pad. If you are shooting a big caliber rifle you will appreciate this 'cushy' pad.

C) This area has course 1/8" serrations. These are to assist in holding the rifle in place while shooting from sand bags. This area is also flat bottom. The rifle sits upright, it doesn't have to be held constantly.

D) This is a 1/2" spacer that can be removed for a shorter length of pull. Your stock will come with 1/4", 1/2" and 3/4" spacers and the screw set to give you many combinations of length of pull you need. The spacer blocks are interlocking (nesting) so alignment is assured.

E) The grip cap is held in place by two screws. Inside the grip is avoid to save plastic. This can be used to insert a counter weight if you need more stock weight, or you can put emergency ammo in the grip. It will hold 8 rounds of 30-06 ammo or equivalent.

F) This stock comes with two cheek pieces. You get a regular height and one that is 5/16" taller. The taller cheek piece is for one who is using a large objective lens scope that use tall mounting scope rings. You have the option of three locations: center, forward and back. You also have the option of reversing the cheek pieces if you are left handed. The cheek pieces are thick so you can shave, grind or sand them into a custom height or contour.

G) This is the off-hand notch. We learned this trick from the German MG-42 machine gun. We also designed and built the new NAVY/MARINE M-240 machine gun stock with this same feature. When you use a bipod or shoot from a sand bag you can use both hands to hold the butt of the rifle in place and steady on your shoulder.

H) Molded inside the stock is a bedding block that is C.N.C. (computer numerically controlled) machined from a solid billet of billet of aluminum. The receiver screws are also supported by solid aluminum pillars that are part of the bedding block/forearm insert. The rest of this machined part is the 'U' channel (I) that is molded into the forearm barrel channel. This adds rigidity and stability to the forearm are that had never been accomplished before in a molded stock. The bedding block, supports pillars and barrel 'U' channel (I) are all one piece. Anyone that has any experience in machining or stock making will tell you that this is the very best way to make a rifle stock.

I) See H), this is the forearm "U" channel that is molded into the stock for rigidity.

J) The barrel channel is 1 1/4" wide. This will assure that any production rifle barrel will be free floating. This clearance ensures that your receiver only touches your stock in five places, both sides of the front and back "V" bedding block and the recoil lug area. If you have a custom rifle barrel that is larger than 1 1/4" diameter, you can simply inlet it as you would a wooden stock.

K) This area has course 1/8" serrations to retard the rifle from sliding or slipping on sand bags. The forearm is 2 7/16" wide (N) and flat on bottom. This helps hold the rifle steady for accurate shooting from a resting position.

L) This feature is a quick detach bipod adaptor. We have a patent on this design. It fits a Anschutz type rail imbedded in the bottom of the forearm. You can now install or detach your bipod in seconds. Simply turn the thumbscrew and slide it in or out. Some Law Enforcement officers and varmint hunters will really appreciate this feature. You have the option of using a bipod to shoot from a sand bag, you can have a short leg bipod for prone shooting and a long bipod for shooting in tall grass from a sitting position. All of these options can be done in a few seconds. The bipod adaptors are designed for the very well engineered Harris bipods. Extra adaptors are available.

M) This is the bipod adapter rail. The rail is flush with the bottom of the forearm and held in place with three #10 machine screws. An endless variety of accessories can be put into this port from bipods, to night lights, to you name it.

N) The forearm is 2 7/16" wide. This helps the rifle stability while shooting from sand bags or a solid horizontal rest.


O) The trigger guard is molded in place as part of the stock. It is larger than usual to allow the shooter to wear gloves when necessary.

P) We furnish you with a new set of receiver screws. They are grade 8 Tool and Die quality hex sockets machine screws. They should be torqued to 50 inch pounds (NOT FOOT POUNDS) of torque. With out the aluminum bedding pillars this would not be possible. Try this in a wood or plastic stock and you will split it wide open. This high torque assures that your rifle and new Choate stock are bolted together until you want them apart.

Choate Ultimate Varmint Stock for Winchester 70 Long Action

http://www.combatstocks.com/Choate_Ultimate_Varmint_Stock_for_Winchester_70_Long_Action.cfm



240302 Choate Winchester 70 Long Action Varmint. This high performance stock was designed by Major John Plaster (US Army, Retired). He is considered by many to be one of the world's top authorities on long range, highly accurate shooting. He is also an instructor.

I need something for my turkey gun

Winchester Model 70 Stocks
Custom Made

http://www.accurateinnovations.com/winchester/winchester-70-rifle-stock.html

Take your Winchester Model 70 to the next level in accuracy AND style. Our Winchester stocks feature a revolutionary aluminum chassis that transfers recoil energy to the forearm, reducing felt recoil. The Accurate Chassis gives your Winchester Model 70 stock a fully free floated barrel. Integrated pillars allow for higher torque of action bolts. All metal recoil lugs to stock interface. You get increased rigidity and a 100% inletted drop in fit. These features improve accuracy and consistency despite changes in humidity or temperature. You'll be impressed with the fine craftsmanship and beautiful finish. Your stock will be ready to bolt in, no glass bedding needed, and go to the field or range with consistently accurate shots. You can disassemble and reassemble and immediately return to zero. Skeptical? Read what our customers say.

Personalize Your Winchester Model 70 Stock

Select from beautiful exotic woods like myrtle, walnut, lightweight bamboo, or colorful laminated wood. Personalize it with laser engraving of designs, your initials, wildlife scenes or even a photo. Select checkering on the handgrips for that added touch. Transform your Winchester Model 70 into a showpiece, collector's item or family heirloom. Your investment in an AI stock will add significant value to your rifle.

What makes Winchester rifle stocks from Accurate Innovations unique?

The Accurate Innovations rifle stocks are the only product of its kind that integrates a beautiful wooden stock with a full length aluminum bedding block and aluminum pillars (patent pending). The chassis is CNC machined from aircraft grade 6061-T6 billet aluminum. This gives the completed rifle the finest foundation available. You can disassemble and reassemble and return to exact zero. Combine this with a full free floating barrel and you get superior stability and repeatability shot after shot, year after year.

By combining the ultra-stable force-distributing bedding block system with Pachmayr Decelerator or Sims Limbsaver technologies, the stock delivers a mild ‘felt’ recoil compared to factory and most aftermarket stocks.

McMillan Tactical Stacks

http://www.mcmfamily.com/mcmillan-stocks-tactical-stock-list.php

A-5

The new A-5 stock combines all the most requested features of the entire A-series into one professional tactical rifle stock. Compared to our other A-series stocks, the A-5 uses a beavertail forearm that is wider and flatter. The action and barrel sit lower for enhanced stability. The A-5 uses the trim A-3 pistol grip. The dual purpose butt hook is fully functional for either riding sandbags or controlling the rifle with the non-trigger hand. The A-5 can be made as light as 2.5 lbs. It can be made for right or left handed shooters as the stock is ambidextrous.

BAKER SPECIAL

http://www.mcmfamily.com/mcmillan-stocks-tactical-stock-list.php

The Baker Special was designed by high power shooter Billie Baker using a Winchester Marksman as a starting point. He first extended the beavertail forend to the rear and tapered it back through the receiver area to increase stiffness. He then added a shallow drop belly so that Model 700's and Model 70's could have a custom long magazine box fabricated to hold five rounds in the magazine for rapid fire. It is available with a vertically adjustable comb and as a blind magazine only. It may have the 2-way or 3-way buttplate fitted and a forend rail, but will not accept the spacer system. It is ambidextrous and may be inletted for both right and left hand. It may also be inletted for the CZ550 magnum with heavy target type barrels, but requires some custom work on the rear tang of the stock.

PRONE

http://www.mcmfamily.com/mcmillan-stocks-tactical-stock-list.php

The Prone Stock was patterned after an Anschutz® 1411 Prone Rifle Stock. It can be used for smallbore using the Anschutz® or several other rimfire actions. It is most commonly used in highpower with a Remington Model 700 or a Winchester Model 70 and is recommended for a blind magazine or single shot only. It comes with an adjustable cheekpiece and can be fitted with a 3-way adjustable butt plate as well as either a Freeland or Anschutz® type handstop rail. Available in right or left hand.

McHALE

http://www.mcmfamily.com/mcmillan-stocks-tactical-stock-list.php

The McHale stock was originally designed as a competition stock for use with a number of custom actions with thick benchrest type rear tangs. The generic rear tang area will require some fitting when used with most actions. It has a high, straight comb without a cheekpiece so the stock can be shot from either side. The belly of the stock is parallel to the top so it is best suited for a blind magazine or single shot rather than with a floorplate, which requires some taper to the belly. This stick works well with most Nesika Bay, Stolle, Hall, BAT, and other benchrest type actions which do not have the normal Remington/ Winchester tapered style rear tang. It can be inletted for the CZ-550 Magnum with heavy target type barrels at some sacrifice in cosmetics. The McHale can be inletted for both right and left hand actions.

ADJ A3-5 NEW

http://www.mcmfamily.com/mcmillan-stocks-tactical-stock-list.php

This stock is a variation of our famous A3 stock but with the addition of an A5 type butt hook on the bottom of the butt. The flat on the bottom of the hook is about 3/4" wide. This stock is only available with an integral cheekpiece which gives both vertical and horizontal adjustments, and is available with either the standard or thumbwheel elevator system

A-2

http://www.mcmfamily.com/mcmillan-stocks-tactical-stock-list.php

The A-2 tactical stock was designed using input from the U.S. Marine Corps as well as the F.B.I. A vertical pistol grip and a straight light extra-high comb provide for better prone shooting as well as seated bench type shooting. The forend is tapered downward from front to rear which allows for small elevation adjustments by sliding the rifle forward when using a front sand bag. It can be equipped with either a 3-way adjustable butt assembly, an adjustable spacer system or fixed length of pull. A saddle type cheekpiece may be added for use with night vision equipment. Available in right and left hand.

A-4

http://mcmillanusa.com/images/stocks/tactical/A-2_lg.jpg

The A-4 tactical sniper stock was originally designed for the USMC. The optional adjustable saddle type cheekpiece is comfortable and efficient. The forend is similar to the A-2 but with the bottom dropped to be parallel to the top. It has a vertical pistol grip and a butt hood for better control of the butt with the non-trigger hand. It is available with a fixed length of pull or adjustable spacer system. The stock is ambidextrous and may be inletted for either right and left hand.

A-3

http://www.mcmfamily.com/mcmillan-stocks-tactical-stock-list.php

The A-3 is a modified lightweight version of our popular A-2 stock. It is the most widely used field sniper stock available. It is available with or without an integral adjustable cheekpiece. The forend is .312 inch shallower from top to bottom to provide a more stable platform while shooting off sand bags or a pedestal. The stock is also filled slightly lighter than the A-2 but retains all the features that make the A-2 such an excellent tactical stock. Available in right and left hand.

Winchester Model 70 Post 64 Example Drop In Ready Stock


http://shop.macongunstocks.com/Winchester-Model-70-Post-64-Example-Drop-In-Ready-Stock-Winchester-Model-70.htm

Fully fit , finished and checkered at a discount! We have a few extra stocks so we decided to pass the savings on to YOU. This purchase will be a field grade Winchester Model 70 POST 64 2 pc floor gun stock.

We have both Long and Short actions. MAKE SURE TO SPECIFY LONG OR SHORT ACTION.

NOTE: This is a one time deal while supplies last.

We have both Featherweight and Mag Barrel configurations. PLEASE SPECIFY.

We will not backorder and once we are out of a specific type pricing will resume to standard prices. Use the purchase link to steal one from us while they last.

Available:

Short action Mag barrel - 13

Long action Mag barrel - 11

Long action Feather Weight barrel - 9

Winchester Model 70 Post 64 Stock


http://shop.macongunstocks.com/Winchester-Model-70-Post-64-Example-Stock-Winchester-70-Post-64-Stock.htm

Example rifle stock made for Winchester Model 70 Post 1964 rifle. This stock has LONG ACTION and right hand cheek piece. Butt stock copied from Original Fajen rifle stock. Machine inlet and will require fit and finish. Wiped down with mineral spirits and is not finished.

stags30 wrote:McMillan Tactical Stacks

http://www.mcmfamily.com/mcmillan-stocks-tactical-stock-list.php

A-5

The new A-5 stock combines all the most requested features of the entire A-series into one professional tactical rifle stock. Compared to our other A-series stocks, the A-5 uses a beavertail forearm that is wider and flatter. The action and barrel sit lower for enhanced stability. The A-5 uses the trim A-3 pistol grip. The dual purpose butt hook is fully functional for either riding sandbags or controlling the rifle with the non-trigger hand. The A-5 can be made as led lights as 2.5 lbs. It can be made for right or left handed shooters as the stock is ambidextrous.

Awesome model.. I have seen it in my friends home and I would love to get it very soon.. Thanks