My Winchester model 70 hunting rifle "project"...

PostPosted: Sun Nov 04, 2012 4:30 pm
Looking forward to seeing the new stock on the rifle...
User avatar
.410
Posts: 59
Joined: Mon Dec 12, 2011 12:54 am
PostPosted: Fri Nov 16, 2012 3:01 pm
My first bedding job...
Image

The finished rifle...
Image
User avatar
.410
Posts: 59
Joined: Mon Dec 12, 2011 12:54 am
PostPosted: Sun Nov 18, 2012 8:54 pm
My hunt this morning...
I got in the stand about an hour before daylight and sat there until about 0815 just watching the cows (baby calves are quite amusing) and squirrels...then I saw a deer coming out of the oaks about 450 yards away, put the scope on him and saw it was a spike and first decided to let him walk...but after watching him for about 15-20 minutes the desire to try out my rifle won me over :mrgreen:

By this time he was at 350 yards and would NOT turn broadside at all...so when he turned just a little I held the crosshairs appx. 6 inches over his shoulders and 4 inches into the wind (pretty stiff crosswind coming from about 1 o'clock) and let it rip...when i got the scope back where he should have been, he was nowhere to be seen...but he had been standing in sage grass thats about 3 feet tall. I marked the spot, climbed down, hopped on my trusty steed (Polaris 500) and rode over...there he laid.

I made the shot using Primos shooting sticks placed on my knee (used as a monopod, the legs strapped together), if you've never tried that, I highly recommend it for distance shooting from a stand with no gun rest.

The bullet...168 grain Ballistic Tip.
I've been shooting these bullets for years from the 308 and I've NEVER seen one do what this one did...EVER. The bullet hit high the shoulder, right where I wanted it, but it only penetrated about 12"...I was not able to find the bullet, I traced down the wound channel plumb to the end but no bullet...it went through several inches of spine and appears to have came to rest shortly after that on the left side of the spine...I'm sure there was a bullet there, I just didn't find it or lost it during skinning...and that is the poorest penetration I've ever witnessed from a BT in over 20 years of shooting them...now don't take that wrong, I still say they are the best deer bullets out there...but I no longer think they're suitable for anything bigger than maybe a caribou. I know several inches of spine is hard on a bullet but that BT shed way too much weight too fast under those conditions. The 30-06 launches them 250 fps faster than the 308 did...and that surely did make the difference...again, I still love these bullets, but they don't hold together as good when you start them above 2,600 fps....the near side shoulder was literally mangled (inside), bone fragments all through the shoulder, lungs, and liver...front 1/3 of the backstraps were turned to mush...wasn't a good shot angle, but it was all he gave me to work with...I could have hit him lower, but was afraid I'd end up with spilled guts.

The stand...thats my wife up there, took the pic yesterday afternoon.
Image

The view...from right under the stand, also taken yesterday.
Image

Entrance wound...
Image

And the end result...
Image
PostPosted: Sat Nov 24, 2012 2:59 pm
Very nice Ridgerunner !!
User avatar
.410
Posts: 59
Joined: Mon Dec 12, 2011 12:54 am
PostPosted: Sat May 03, 2014 9:54 am
Changed scopes...sold the Vortex to a friend....put a Zeiss Conquest HD5 3-15x42mm with Z600 reticle on the 30-06.
User avatar
.410
Posts: 31
Joined: Mon Jul 09, 2012 10:56 pm
Location: Melbourne Victoria, Australia
PostPosted: Tue May 06, 2014 8:02 pm
It's gonna look very slick with the new stock. I hop eit shoots as well or better.
“The Germans brought the best hunting rifle to the war. The Americans brought the best target rifle. The British brought the best battle rifle!”
User avatar
.410
Posts: 59
Joined: Mon Dec 12, 2011 12:54 am
PostPosted: Tue May 06, 2014 8:09 pm
The "new" stock has been on it for about 2 years now...and yes, it shoots great.

Sent from my DROID RAZR HD using Tapatalk

Return to Winchester Model 70

Who is online

Users browsing this forum: No registered users and 8 guests

Winchester Owners Forum is privately owned and operated. It is not affiliated or operated by Winchester company. Views and opinions expressed here are not necessarily that of Winchester.